Detection of ChArUco Corners {#tutorial_charuco_detection}
==============================
ArUco markers and boards are very useful due to their fast detection and their versatility.
However, one of the problems of ArUco markers is that the accuracy of their corner positions is not too high,
even after applying subpixel refinement.
On the contrary, the corners of chessboard patterns can be refined more accurately since each corner is
surrounded by two black squares. However, finding a chessboard pattern is not as versatile as finding an ArUco board:
it has to be completely visible and occlusions are not permitted.
A ChArUco board tries to combine the benefits of these two approaches:
The ArUco part is used to interpolate the position of the chessboard corners, so that it has the versatility of marker
boards, since it allows occlusions or partial views. Moreover, since the interpolated corners belong to a chessboard,
they are very accurate in terms of subpixel accuracy.
When high precision is necessary, such as in camera calibration, Charuco boards are a better option than standard
Aruco boards.
ChArUco Board Creation
------
The aruco module provides the ```cv::aruco::CharucoBoard``` class that represents a Charuco Board and which inherits from the ```Board``` class.
This class, as the rest of ChArUco functionalities, are defined in:
@code{.cpp}
#include <opencv2/aruco/charuco.hpp>
@endcode
To define a ```CharucoBoard```, it is necesary:
- Number of chessboard squares in X direction.
- Number of chessboard squares in Y direction.
- Length of square side.
- Length of marker side.
- The dictionary of the markers.
- Ids of all the markers.
As for the ```GridBoard``` objects, the aruco module provides a function to create ```CharucoBoard```s easily. This function
is the static function ```cv::aruco::CharucoBoard::create()``` :
@code{.cpp}
cv::aruco::CharucoBoard board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
@endcode
- The first and second parameters are the number of squares in X and Y direction respectively.
- The third and fourth parameters are the length of the squares and the markers respectively. They can be provided
in any unit, having in mind that the estimated pose for this board would be measured in the same units (usually meters are used).
- Finally, the dictionary of the markers is provided.
The ids of each of the markers are assigned by default in ascending order and starting on 0, like in ```GridBoard::create()```.
This can be easily customized by accessing to the ids vector through ```board.ids```, like in the ```Board``` parent class.
Once we have our ```CharucoBoard``` object, we can create an image to print it. This can be done with the
<code>CharucoBoard::draw()</code> method:
@code{.cpp}
cv::Ptr<cv::aruco::CharucoBoard> board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
cv::Mat boardImage;
board->draw( cv::Size(600, 500), boardImage, 10, 1 );
@endcode
- The first parameter is the size of the output image in pixels. In this case 600x500 pixels. If this is not proportional
to the board dimensions, it will be centered on the image.
- ```boardImage```: the output image with the board.
- The third parameter is the (optional) margin in pixels, so none of the markers are touching the image border.
In this case the margin is 10.
- Finally, the size of the marker border, similarly to ```drawMarker()``` function. The default value is 1.
The output image will be something like this:
A full working example is included in the ```create_board_charuco.cpp``` inside the module samples folder.
Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
"_ output path_/chboard.png" -w=5 -h=7 -sl=200 -ml=120 -d=10
@endcode
ChArUco Board Detection
------
When you detect a ChArUco board, what you are actually detecting is each of the chessboard corners of the board.
Each corner on a ChArUco board has a unique identifier (id) assigned. These ids go from 0 to the total number of corners
in the board.
So, a detected ChArUco board consists in:
- ```std::vector<cv::Point2f> charucoCorners``` : list of image positions of the detected corners.
- ```std::vector<int> charucoIds``` : ids for each of the detected corners in ```charucoCorners```.
The detection of the ChArUco corners is based on the previous detected markers. So that, first markers are detected, and then
ChArUco corners are interpolated from markers.
The function that detect the ChArUco corners is ```cv::aruco::interpolateCornersCharuco()``` . This example shows the whole process. First, markers are detected, and then the ChArUco corners are interpolated from these markers.
@code{.cpp}
cv::Mat inputImage;
cv::Mat cameraMatrix, distCoeffs;
// camera parameters are read from somewhere
readCameraParameters(cameraMatrix, distCoeffs);
cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
cv::Ptr<cv::aruco::CharucoBoard> board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
...
std::vector<int> markerIds;
std::vector<std::vector<cv::Point2f>> markerCorners;
cv::aruco::detectMarkers(inputImage, board.dictionary, markerCorners, markerIds);
// if at least one marker detected
if(markerIds.size() > 0) {
std::vector<cv::Point2f> charucoCorners;
std::vector<int> charucoIds;
cv::aruco::interpolateCornersCharuco(markerCorners, markerIds, inputImage, board, charucoCorners, charucoIds, cameraMatrix, distCoeffs);
}
@endcode
The parameters of the ```interpolateCornersCharuco()``` function are:
- ```markerCorners``` and ```markerIds```: the detected markers from ```detectMarkers()``` function.
- ```inputImage```: the original image where the markers were detected. The image is necessary to perform subpixel refinement
in the ChArUco corners.
- ```board```: the ```CharucoBoard``` object
- ```charucoCorners``` and ```charucoIds```: the output interpolated Charuco corners
- ```cameraMatrix``` and ```distCoeffs```: the optional camera calibration parameters
- The function returns the number of Charuco corners interpolated.
In this case, we have call ```interpolateCornersCharuco()``` providing the camera calibration parameters. However these parameters
are optional. A similar example without these parameters would be:
@code{.cpp}
cv::Mat inputImage;
cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
cv::Ptr<cv::aruco::CharucoBoard> board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
...
std::vector<int> markerIds;
std::vector<std::vector<cv::Point2f>> markerCorners;
cv::Ptr<cv::aruco::DetectorParameters> params;
params->cornerRefinementMethod = cv::aruco::CORNER_REFINE_NONE;
cv::aruco::detectMarkers(inputImage, board.dictionary, markerCorners, markerIds, params);
// if at least one marker detected
if(markerIds.size() > 0) {
std::vector<cv::Point2f> charucoCorners;
std::vector<int> charucoIds;
cv::aruco::interpolateCornersCharuco(markerCorners, markerIds, inputImage, board, charucoCorners, charucoIds);
}
@endcode
If calibration parameters are provided, the ChArUco corners are interpolated by, first, estimating a rough pose from the ArUco markers
and, then, reprojecting the ChArUco corners back to the image.
On the other hand, if calibration parameters are not provided, the ChArUco corners are interpolated by calculating the
corresponding homography between the ChArUco plane and the ChArUco image projection.
The main problem of using homography is that the interpolation is more sensible to image distortion. Actually, the homography is only performed
using the closest markers of each ChArUco corner to reduce the effect of distortion.
When detecting markers for ChArUco boards, and specially when using homography, it is recommended to disable the corner refinement of markers. The reason of this
is that, due to the proximity of the chessboard squares, the subpixel process can produce important
deviations in the corner positions and these deviations are propagated to the ChArUco corner interpolation,
producing poor results.
Furthermore, only those corners whose two surrounding markers have be found are returned. If any of the two surrounding markers has
not been detected, this usually means that there is some occlusion or the image quality is not good in that zone. In any case, it is
preferable not to consider that corner, since what we want is to be sure that the interpolated ChArUco corners are very accurate.
After the ChArUco corners have been interpolated, a subpixel refinement is performed.
Once we have interpolated the ChArUco corners, we would probably want to draw them to see if their detections are correct.
This can be easily done using the ```drawDetectedCornersCharuco()``` function:
@code{.cpp}
cv::aruco::drawDetectedCornersCharuco(image, charucoCorners, charucoIds, color);
@endcode
- ```image``` is the image where the corners will be drawn (it will normally be the same image where the corners were detected).
- The ```outputImage``` will be a clone of ```inputImage``` with the corners drawn.
- ```charucoCorners``` and ```charucoIds``` are the detected Charuco corners from the ```interpolateCornersCharuco()``` function.
- Finally, the last parameter is the (optional) color we want to draw the corners with, of type ```cv::Scalar```.
For this image:
The result will be:
In the presence of occlusion. like in the following image, although some corners are clearly visible, not all their surrounding markers have been detected due occlusion and, thus, they are not interpolated:
Finally, this is a full example of ChArUco detection (without using calibration parameters):
@code{.cpp}
cv::VideoCapture inputVideo;
inputVideo.open(0);
cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
cv::Ptr<cv::aruco::CharucoBoard> board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
cv::Ptr<cv::aruco::DetectorParameters> params;
params->cornerRefinementMethod = cv::aruco::CORNER_REFINE_NONE;
while (inputVideo.grab()) {
cv::Mat image, imageCopy;
inputVideo.retrieve(image);
image.copyTo(imageCopy);
std::vector<int> ids;
std::vector<std::vector<cv::Point2f>> corners;
cv::aruco::detectMarkers(image, dictionary, corners, ids, params);
// if at least one marker detected
if (ids.size() > 0) {
cv::aruco::drawDetectedMarkers(imageCopy, corners, ids);
std::vector<cv::Point2f> charucoCorners;
std::vector<int> charucoIds;
cv::aruco::interpolateCornersCharuco(corners, ids, image, board, charucoCorners, charucoIds);
// if at least one charuco corner detected
if(charucoIds.size() > 0)
cv::aruco::drawDetectedCornersCharuco(imageCopy, charucoCorners, charucoIds, cv::Scalar(255, 0, 0));
}
cv::imshow("out", imageCopy);
char key = (char) cv::waitKey(waitTime);
if (key == 27)
break;
}
@endcode
Sample video:
@htmlonly
<iframe width="420" height="315" src="https://www.youtube.com/embed/Nj44m_N_9FY" frameborder="0" allowfullscreen></iframe>
@endhtmlonly
A full working example is included in the ```detect_board_charuco.cpp``` inside the module samples folder.
Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
-c="_path_/calib.txt" -dp="_path_/detector_params.yml" -w=5 -h=7 -sl=0.04 -ml=0.02 -d=10
@endcode
ChArUco Pose Estimation
------
The final goal of the ChArUco boards is finding corners very accurately for a high precision calibration or pose estimation.
The aruco module provides a function to perform ChArUco pose estimation easily. As in the ```GridBoard```, the coordinate system
of the ```CharucoBoard``` is placed in the board plane with the Z axis pointing out, and centered in the bottom left corner of the board.
The function for pose estimation is ```estimatePoseCharucoBoard()```:
@code{.cpp}
cv::aruco::estimatePoseCharucoBoard(charucoCorners, charucoIds, board, cameraMatrix, distCoeffs, rvec, tvec);
@endcode
- The ```charucoCorners``` and ```charucoIds``` parameters are the detected charuco corners from the ```interpolateCornersCharuco()```
function.
- The third parameter is the ```CharucoBoard``` object.
- The ```cameraMatrix``` and ```distCoeffs``` are the camera calibration parameters which are necessary for pose estimation.
- Finally, the ```rvec``` and ```tvec``` parameters are the output pose of the Charuco Board.
- The function returns true if the pose was correctly estimated and false otherwise. The main reason of failing is that there are
not enough corners for pose estimation or they are in the same line.
The axis can be drawn using ```drawAxis()``` to check the pose is correctly estimated. The result would be: (X:red, Y:green, Z:blue)
A full example of ChArUco detection with pose estimation:
@code{.cpp}
cv::VideoCapture inputVideo;
inputVideo.open(0);
cv::Mat cameraMatrix, distCoeffs;
// camera parameters are read from somewhere
readCameraParameters(cameraMatrix, distCoeffs);
cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
cv::Ptr<cv::aruco::CharucoBoard> board = cv::aruco::CharucoBoard::create(5, 7, 0.04, 0.02, dictionary);
while (inputVideo.grab()) {
cv::Mat image, imageCopy;
inputVideo.retrieve(image);
image.copyTo(imageCopy);
std::vector<int> ids;
std::vector<std::vector<cv::Point2f>> corners;
cv::aruco::detectMarkers(image, dictionary, corners, ids);
// if at least one marker detected
if (ids.size() > 0) {
std::vector<cv::Point2f> charucoCorners;
std::vector<int> charucoIds;
cv::aruco::interpolateCornersCharuco(corners, ids, image, board, charucoCorners, charucoIds, cameraMatrix, distCoeffs);
// if at least one charuco corner detected
if(charucoIds.size() > 0) {
cv::aruco::drawDetectedCornersCharuco(imageCopy, charucoCorners, charucoIds, cv::Scalar(255, 0, 0));
cv::Vec3d rvec, tvec;
bool valid = cv::aruco::estimatePoseCharucoBoard(charucoCorners, charucoIds, board, cameraMatrix, distCoeffs, rvec, tvec);
// if charuco pose is valid
if(valid)
cv::aruco::drawAxis(imageCopy, cameraMatrix, distCoeffs, rvec, tvec, 0.1);
}
}
cv::imshow("out", imageCopy);
char key = (char) cv::waitKey(waitTime);
if (key == 27)
break;
}
@endcode
A full working example is included in the ```detect_board_charuco.cpp``` inside the module samples folder.
Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
"_path_/calib.txt" -dp="_path_/detector_params.yml" -w=5 -h=7 -sl=0.04 -ml=0.02 -d=10
@endcode