aruco_detection.markdown

Detection of ArUco Markers {#tutorial_aruco_detection}
==============================

Pose estimation is of great importance in many computer vision applications: robot navigation,
augmented reality, and many more. This process is based on finding correspondences between points in
the real environment and their 2d image projection. This is usually a difficult step, and thus it is
common the use of synthetic or fiducial markers to make it easier.

One of the most popular approach is the use of binary square fiducial markers. The main benefit
of these markers is that a single marker provides enough correspondences (its four corners)
to obtain the camera pose. Also, the inner binary codification makes them specially robust, allowing
the possibility of applying error detection and correction techniques.

The aruco module is based on the [ArUco library](http://www.uco.es/investiga/grupos/ava/node/26),
a popular library for detection of square fiducial markers developed by Rafael Muñoz and Sergio Garrido:

> S. Garrido-Jurado, R. Muñoz-Salinas, F. J. Madrid-Cuevas, and M. J. Marín-Jiménez. 2014.
> "Automatic generation and detection of highly reliable fiducial markers under occlusion".
> Pattern Recogn. 47, 6 (June 2014), 2280-2292. DOI=10.1016/j.patcog.2014.01.005

The aruco functionalities are included in:
@code{.cpp}
    #include <opencv2/aruco.hpp>
@endcode


Markers and Dictionaries
------

An ArUco marker is a synthetic square marker composed by a wide black border and a inner binary
matrix which determines its identifier (id). The black border facilitates its fast detection in the
image and the binary codification allows its identification and the application of error detection
and correction techniques. The marker size determines the size of the internal matrix. For instance
a marker size of 4x4 is composed by 16 bits.

Some examples of ArUco markers:

![Example of markers images](images/markers.jpg)

It must be noted that a marker can be found rotated in the environment, however, the detection
process needs to be able to determine its original rotation, so that each corner is identified
unequivocally. This is also done based on the binary codification.

A dictionary of markers is a set of markers that are considered in an specific application. It is
simply the list of binary codifications of each of its markers.

The main properties of a dictionary are the dictionary size and the marker size.

- The dictionary size is the number of markers that composed the dictionary.
- The marker size is the size of those markers (the number of bits).

The aruco module includes some predefined dictionaries covering a range of different dictionary
sizes and marker sizes.

One may think that the marker id is the number obtained from converting the binary codification to
a decimal base number. However, this is not possible since for high marker sizes the number of bits
is too high and managing so huge numbers is not practical. Instead, a marker id is simply
the marker index inside the dictionary it belongs to. For instance, the first 5 markers inside a
dictionary has the ids: 0, 1, 2, 3 and 4.

More information about dictionaries is provided in the "Selecting a dictionary" section.


Marker Creation
------

Before their detection, markers need to be printed in order to be placed in the environment.
Marker images can be generated using the ```drawMarker()``` function.

For example, lets analyze the following call:

@code{.cpp}
    cv::Mat markerImage;
    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
    cv::aruco::drawMarker(dictionary, 23, 200, markerImage, 1);
@endcode

First, the ```Dictionary``` object is created by choosing one of the predefined dictionaries in the aruco module.
Concretely, this dictionary is composed by 250 markers and a marker size of 6x6 bits (```DICT_6X6_250```).

The parameters of ```drawMarker``` are:

- The first parameter is the ```Dictionary``` object previously created.
- The second parameter is the marker id, in this case the marker 23 of the dictionary ```DICT_6X6_250```.
Note that each dictionary is composed by a different number of markers. In this case, the valid ids
go from 0 to 249. Any specific id out of the valid range will produce an exception.
- The third parameter, 200, is the size of the output marker image. In this case, the output image
will have a size of 200x200 pixels. Note that this parameter should be large enough to store the
number of bits for the specific dictionary. So, for instance, you cannot generate an image of
5x5 pixels for a marker size of 6x6 bits (and that is without considering the marker border).
Furthermore, to avoid deformations, this parameter should be proportional to the number of bits +
border size, or at least much higher than the marker size (like 200 in the example), so that
deformations are insignificant.
- The forth parameter is the output image.
- Finally, the last parameter is an optional parameter to specify the width of the marker black
border. The size is specified proportional to the number of bits. For instance a value of 2 means
that the border will have a width equivalent to the size of two internal bits. The default value
is 1.

The generated image is:

![Generated marker](images/marker23.jpg)

A full working example is included in the ```create_marker.cpp``` inside the module samples folder.

Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
    "/Users/Sarthak/Dropbox/OpenCV_GSoC/marker.png" -d=10 -id=1
@endcode

Marker Detection
------

Given an image where some ArUco markers are visible, the detection process has to return a list of
detected markers. Each detected marker includes:

- The position of its four corners in the image (in their original order).
- The id of the marker.

The marker detection process is comprised by two main steps:

1. Detection of marker candidates. In this step the image is analyzed in order to find square shapes
that are candidates to be markers. It begins with an adaptive thresholding to segment the markers,
then contours are extracted from the thresholded image and those that are not convex or do not
approximate to a square shape are discarded. Some extra filtering are also applied (removing
too small or too big contours, removing contours too close to each other, etc).

2. After the candidate detection, it is necessary to determine if they are actually markers by
analyzing their inner codification. This step starts by extracting the marker bits of each marker.
To do so, first, perspective transformation is applied to obtain the marker in its canonical form. Then, the
canonical image is thresholded using Otsu to separate white and black bits. The image is divided in
different cells according to the marker size and the border size and the amount of black or white
pixels on each cell is counted to determine if it is a white or a black bit. Finally, the bits
are analyzed to determine if the marker belongs to the specific dictionary and error correction
techniques are employed when necessary.


Consider the following image:

![Original image with markers](images/singlemarkersoriginal.png)

These are the detected markers (in green):

![Image with detected markers](images/singlemarkersdetection.png)

And these are the marker candidates that have been rejected during the identification step (in pink):

![Image with rejected candidates](images/singlemarkersrejected.png)

In the aruco module, the detection is performed in the ```detectMarkers()``` function. This function is
the most important in the module, since all the rest of functionalities are based on the
previous detected markers returned by ```detectMarkers()```.

An example of marker detection:

@code{.cpp}
    cv::Mat inputImage;
    ...
    std::vector<int> markerIds;
    std::vector<std::vector<cv::Point2f>> markerCorners, rejectedCandidates;
    cv::Ptr<cv::aruco::DetectorParameters> parameters;
    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
    cv::aruco::detectMarkers(inputImage, dictionary, markerCorners, markerIds, parameters, rejectedCandidates);
@endcode

The parameters of ```detectMarkers``` are:

- The first parameter is the image where the markers are going to be detected.
- The second parameter is the dictionary object, in this case one of the predefined dictionaries (```DICT_6X6_250```).
- The detected markers are stored in the ```markerCorners``` and ```markerIds``` structures:
    - ```markerCorners``` is the list of corners of the detected markers. For each marker, its four
    corners are returned in their original order (which is clockwise starting with top left). So, the first corner is the top left corner, followed by the top right, bottom right and bottom left.
    - ```markerIds``` is the list of ids of each of the detected markers in ```markerCorners```.
    Note that the returned ```markerCorners``` and ```markerIds``` vectors have the same sizes.
- The fourth parameter is the object of type ```DetectionParameters```. This object includes all the
parameters that can be customized during the detection process. This parameters are commented in
detail in the next section.
- The final parameter, ```rejectedCandidates```, is a returned list of marker candidates, i.e. those
squares that have been found but they do not present a valid codification. Each candidate is also
defined by its four corners, and its format is the same than the ```markerCorners``` parameter. This
parameter can be omitted and is only useful for debugging purposes and for 'refind' strategies (see ```refineDetectedMarkers()``` ).


The next thing you probably want to do after ```detectMarkers()``` is checking that your markers have
been correctly detected. Fortunately, the aruco module provides a function to draw the detected
markers in the input image, this function is ```drawDetectedMarkers()```. For example:

@code{.cpp}
    cv::Mat outputImage
    cv::aruco::drawDetectedMarkers(image, markerCorners, markerIds);
@endcode

- ```image``` is the input/output image where the markers will be drawn (it will normally be the same image where the markers were detected).
- ```markerCorners``` and ```markerIds``` are the structures of the detected markers in the same format
provided by the ```detectMarkers()``` function.

![Image with detected markers](images/singlemarkersdetection.png)

Note that this function is only provided for visualization and its use can be perfectly omitted.

With these two functions we can create a basic marker detection loop to detect markers from our
camera:

@code{.cpp}
    cv::VideoCapture inputVideo;
    inputVideo.open(0);
    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
    while (inputVideo.grab()) {
        cv::Mat image, imageCopy;
        inputVideo.retrieve(image);
        image.copyTo(imageCopy);

        std::vector<int> ids;
        std::vector<std::vector<cv::Point2f> > corners;
        cv::aruco::detectMarkers(image, dictionary, corners, ids);

        // if at least one marker detected
        if (ids.size() > 0)
            cv::aruco::drawDetectedMarkers(imageCopy, corners, ids);

        cv::imshow("out", imageCopy);
        char key = (char) cv::waitKey(waitTime);
        if (key == 27)
            break;
    }
@endcode

Note that some of the optional parameters have been omitted, like the detection parameter object or the
output vector of rejected candidates.

A full working example is included in the ```detect_markers.cpp``` inside the module samples folder.

Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
    -c="_path_/calib.txt" -d=10
@endcode



Pose Estimation
------

The next thing you probably want to do after detecting the markers is to obtain the camera pose from them.

To perform camera pose estimation you need to know the calibration parameters of your camera. This is
the camera matrix and distortion coefficients. If you do not know how to calibrate your camera, you can
take a look to the ```calibrateCamera()``` function and the Calibration tutorial of OpenCV. You can also calibrate your camera using the aruco module
as it is explained in the Calibration with aruco tutorial. Note that this only need to be done once unless the
camera optics are modified (for instance changing its focus).

At the end, what you get after the calibration is the camera matrix: a matrix of 3x3 elements with the
focal distances and the camera center coordinates (a.k.a intrinsic parameters), and the distortion
coefficients: a vector of 5 elements or more that models the distortion produced by your camera.

When you estimate the pose with ArUco markers, you can estimate the pose of each marker individually.
If you want to estimate one pose from a set of markers, what you want to use is aruco Boards (see ArUco
Boards tutorial).

The camera pose respect to a marker is the 3d transformation from the marker coordinate system to the
camera coordinate system. It is specified by a rotation and a translation vector (see ```solvePnP()``` function for more
information).

The aruco module provides a function to estimate the poses of all the detected markers:

@code{.cpp}
    cv::Mat cameraMatrix, distCoeffs;
    ...
    std::vector<cv::Vec3d> rvecs, tvecs;
    cv::aruco::estimatePoseSingleMarkers(corners, 0.05, cameraMatrix, distCoeffs, rvecs, tvecs);
@endcode

- The ```corners``` parameter is the vector of marker corners returned by the ```detectMarkers()``` function.
- The second parameter is the size of the marker side in meters or in any other unit. Note that the
translation vectors of the estimated poses will be in the same unit
- ```cameraMatrix``` and ```distCoeffs``` are the camera calibration parameters that need to be known a priori.
- ```rvecs``` and ```tvecs``` are the rotation and translation vectors respectively, for each of the markers
in corners.

The marker coordinate system that is assumed by this function is placed at the center of the marker
with the Z axis pointing out, as in the following image. Axis-color correspondences are X:red, Y:green, Z:blue.

![Image with axis drawn](images/singlemarkersaxis.png)

The aruco module provides a function to draw the axis as in the image above, so pose estimation can be
checked:

@code{.cpp}
    cv::aruco::drawAxis(image, cameraMatrix, distCoeffs, rvec, tvec, 0.1);
@endcode

- ```image``` is the input/output image where the axis will be drawn (it will normally be the same image where the markers were detected).
- ```cameraMatrix``` and ```distCoeffs``` are the camera calibration parameters.
- ```rvec``` and ```tvec``` are the pose parameters whose axis want to be drawn.
- The last parameter is the length of the axis, in the same unit that tvec (usually meters)

A basic full example for pose estimation from single markers:

@code{.cpp}
    cv::VideoCapture inputVideo;
    inputVideo.open(0);

    cv::Mat cameraMatrix, distCoeffs;
    // camera parameters are read from somewhere
    readCameraParameters(cameraMatrix, distCoeffs);

    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);

    while (inputVideo.grab()) {
        cv::Mat image, imageCopy;
        inputVideo.retrieve(image);
        image.copyTo(imageCopy);

        std::vector<int> ids;
        std::vector<std::vector<cv::Point2f>> corners;
        cv::aruco::detectMarkers(image, dictionary, corners, ids);

        // if at least one marker detected
        if (ids.size() > 0) {
            cv::aruco::drawDetectedMarkers(imageCopy, corners, ids);

            std::vector<cv::Vec3d> rvecs, tvecs;
            cv::aruco::estimatePoseSingleMarkers(corners, 0.05, cameraMatrix, distCoeffs, rvecs, tvecs);
            // draw axis for each marker
            for(int i=0; i<ids.size(); i++)
                cv::aruco::drawAxis(imageCopy, cameraMatrix, distCoeffs, rvecs[i], tvecs[i], 0.1);
        }

        cv::imshow("out", imageCopy);
        char key = (char) cv::waitKey(waitTime);
        if (key == 27)
            break;
    }
@endcode

Sample video:

@htmlonly
<iframe width="420" height="315" src="https://www.youtube.com/embed/IsXWrcB_Hvs" frameborder="0" allowfullscreen></iframe>
@endhtmlonly

A full working example is included in the ```detect_markers.cpp``` inside the module samples folder.

Note: The samples now take input via commandline via the [OpenCV Commandline Parser](http://docs.opencv.org/trunk/d0/d2e/classcv_1_1CommandLineParser.html#gsc.tab=0). For this file the example parameters will look like
@code{.cpp}
    -c="_path_/calib.txt" -d=10
@endcode



Selecting a dictionary
------

The aruco module provides the ```Dictionary``` class to represent a dictionary of markers.

Apart of the marker size and the number of markers in the dictionary, there is another important dictionary
parameter, the inter-marker distance. The inter-marker distance is the minimum distance among its markers
and it determines the error detection and correction capabilities of the dictionary.

In general, lower dictionary sizes and higher marker sizes increase the inter-marker distance and
vice-versa. However, the detection of markers with higher sizes is more complex, due to the higher
amount of bits that need to be extracted from the image.

For instance, if you need only 10 markers in your application, it is better to use a dictionary only
composed by those 10 markers than using one dictionary composed by 1000 markers. The reason is that
the dictionary composed by 10 markers will have a higher inter-marker distance and, thus, it will be
more robust to errors.

As a consequence, the aruco module includes several ways to select your dictionary of markers, so that
you can increase your system robustness:

- Predefined dictionaries:

This is the easiest way to select a dictionary. The aruco module includes a set of predefined dictionaries
 of a variety of marker sizes and number of markers. For instance:

@code{.cpp}
    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::getPredefinedDictionary(cv::aruco::DICT_6X6_250);
@endcode

DICT_6X6_250 is an example of predefined dictionary of markers with 6x6 bits and a total of 250
markers.

From all the provided dictionaries, it is recommended to choose the smaller one that fits to your application.
For instance, if you need 200 markers of 6x6 bits, it is better to use DICT_6X6_250 than DICT_6X6_1000.
The smaller the dictionary, the higher the inter-marker distance.

- Automatic dictionary generation:

The dictionary can be generated automatically to adjust to the desired number of markers and bits, so that
the inter-marker distance is optimized:

@code{.cpp}
    cv::Ptr<cv::aruco::Dictionary> dictionary = cv::aruco::generateCustomDictionary(36, 5);
@endcode

This will generate a customized dictionary composed by 36 markers of 5x5 bits. The process can take several
seconds, depending on the parameters (it is slower for larger dictionaries and higher number of bits).

- Manually dictionary generation:

Finally, the dictionary can be configured manually, so that any codification can be employed. To do that,
the ```Dictionary``` object parameters need to be assigned manually. It must be noted that, unless you have
 a special reason to do this manually, it is preferable to use one of the previous alternatives.

The ```Dictionary``` parameters are:


@code{.cpp}
    class Dictionary {
        public:

        Mat bytesList;
        int markerSize;
        int maxCorrectionBits; // maximum number of bits that can be corrected

        ...

    }
@endcode

<code>bytesList</code> is the array that contains all the information about the marker codes. ```markerSize``` is the size
 of each marker dimension (for instance, 5 for markers with 5x5 bits). Finally, ```maxCorrectionBits``` is
the maximum number of erroneous bits that can be corrected during the marker detection. If this value is too
high, it can lead to a high amount of false positives.

Each row in ```bytesList``` represents one of the dictionary markers. However, the markers are not stored in its
binary form, instead they are stored in a special format to simplificate their detection.

Fortunately, a marker can be easily transformed to this form using the static method ```Dictionary::getByteListFromBits()```.

For example:

@code{.cpp}
    cv::aruco::Dictionary dictionary;
    // markers of 6x6 bits
    dictionary.markerSize = 6;
    // maximum number of bit corrections
    dictionary.maxCorrectionBits = 3;

    // lets create a dictionary of 100 markers
    for(int i=0; i<100; i++)
    {
        // assume generateMarkerBits() generate a new marker in binary format, so that
        // markerBits is a 6x6 matrix of CV_8UC1 type, only containing 0s and 1s
        cv::Mat markerBits = generateMarkerBits();
        cv::Mat markerCompressed = cv::aruco::Dictionary::getByteListFromBits(markerBits);
        // add the marker as a new row
        dictionary.bytesList.push_back(markerCompressed);
    }
@endcode




Detector Parameters
------

One of the parameters of ```detectMarkers()``` function is a ```DetectorParameters``` object. This object
includes all the options that can be customized during the marker detection process.

In this section, all these parameters are commented. The parameters can be classified depending on
the process they are involved:

#### Thresholding

One of the first steps of the marker detection process is an adaptive thresholding of the input image.

For instance, the thresholded image for the sample image used above is:

![Thresholded image](images/singlemarkersthresh.png)

This thresholding can be customized in the following parameters:

- ```int adaptiveThreshWinSizeMin```, ```int adaptiveThreshWinSizeMax```, ```int adaptiveThreshWinSizeStep```

The ```adaptiveThreshWinSizeMin``` and ```adaptiveThreshWinSizeMax``` parameters represent the interval where the
thresholding window sizes (in pixels) are selected for the adaptive thresholding (see OpenCV
```threshold()``` function for more details).

The parameter ```adaptiveThreshWinSizeStep``` indicates the increments on the window size from
```adaptiveThreshWinSizeMin``` to adaptiveThreshWinSizeMax```.

For instance, for the values ```adaptiveThreshWinSizeMin``` = 5 and adaptiveThreshWinSizeMax``` = 21 and
```adaptiveThreshWinSizeStep``` = 4, there will be 5 thresholding steps with window sizes 5, 9, 13, 17 and 21.
On each thresholding image, marker candidates will be extracted.

Low values of window size can 'break' the marker border if the marker size is too large, and
it would not be detected, like in the following image:

![Broken marker image](images/singlemarkersbrokenthresh.png)

On the other hand, too high values can produce the same effect if the markers are too small, and it can also
reduce the performance. Moreover the process would tend to a global thresholding, losing the adaptive benefits.

The simplest case is using the same value for ```adaptiveThreshWinSizeMin``` and
 ```adaptiveThreshWinSizeMax```, which produces a single thresholding step. However, it is usually better using a
 range of values for the window size, although many thresholding steps can also reduce the performance considerably.

Default values:

```adaptiveThreshWinSizeMin```: 3, ```adaptiveThreshWinSizeMax```: 23, ```adaptiveThreshWinSizeStep```: 10


- ```double adaptiveThreshConstant```

This parameter represents the constant value added in the thresholding condition (see OpenCV
```threshold()``` function for more details). Its default value is a good option in most cases.

Default value: 7


#### Contour filtering

After thresholding, contours are detected. However, not all contours
are considered as marker candidates. They are filtered out in different steps so that contours that are
very unlikely to be markers are discarded. The parameters in this section customize
this filtering process.

It must be noted that in most cases it is a question of balance between detection capacity
and performance. All the considered contours will be processed in the following stages, which usually have
a higher computational cost. So, it is preferred to discard wrong candidates in this stage than in the later stages.

On the other hand, if the filtering conditions are too strict, the real marker contours could be discarded and,
hence, not detected.

- ```double minMarkerPerimeterRate```, ```double maxMarkerPerimeterRate```

These parameters determine the minimum and maximum size of a marker, concretely the maximum and
minimum marker perimeter. They are not specified in absolute pixels values, instead they are
specified relative to the maximum dimension of the input image.

For instance, a image with size 640x480 and a minimum relative marker perimeter of 0.05 will lead
to a minimum marker perimeter of 640x0.05 = 32 pixels, since 640 is the maximum dimension of the
image. The same applies for the ```maxMarkerPerimeterRate``` parameter.

If the ```minMarkerPerimeterRate``` is too low, it can penalize considerably the detection performance since
many more contours would be considered for future stages.
This penalization is not so noticeable for the ```maxMarkerPerimeterRate``` parameter, since there are
usually many more small contours than big contours.
A ```minMarkerPerimeterRate``` value of 0 and a ```maxMarkerPerimeterRate``` value of 4 (or more) will be
equivalent to consider all the contours in the image, however this is not recommended for
the performance reasons.

Default values:

 ```minMarkerPerimeterRate``` : 0.03, ```maxMarkerPerimeterRate``` : 4.0


- ```double polygonalApproxAccuracyRate```

A polygonal approximation is applied to each candidate and only those that approximate to a square
shape are accepted. This value determines the maximum error that the polygonal approximation can
produce (see ```approxPolyDP()``` function for more information).

This parameter is relative to the candidate length (in pixels). So if the candidate has
a perimeter of 100 pixels and the value of ```polygonalApproxAccuracyRate``` is 0.04, the maximum error
would be 100x0.04=5.4 pixels.

In most cases, the default value works fine, but higher error values could be necessary for high
distorted images.

Default value: 0.05


- ```double minCornerDistanceRate```

Minimum distance between any pair of corners in the same marker. It is expressed relative to the marker
perimeter. Minimum distance in pixels is Perimeter * minCornerDistanceRate.

Default value: 0.05

- ```double minMarkerDistanceRate```

Minimum distance between any pair of corners from two different markers. It is expressed relative to
the minimum marker perimeter of the two markers. If two candidates are too close, the smaller one is ignored.

Default value: 0.05

- ```int minDistanceToBorder```

Minimum distance to any of the marker corners to the image border (in pixels). Markers partially occluded
by the image border can be correctly detected if the occlusion is small. However, if one of the corner
is occluded, the returned corner is usually placed in a wrong position near the image border.

If the position of marker corners is important, for instance if you want to do pose estimation, it is
better to discard markers with any of their corners are too close to the image border. Elsewhere, it is not necessary.

Default value: 3


#### Bits Extraction

After candidate detection, the bits of each candidate are analyzed in order to determine if they
are markers or not.

Before analyzing the binary code itself, the bits need to be extracted. To do so, the perspective
distortion is removed and the resulting image is thresholded using Otsu threshold to separate
black and white pixels.

This is an example of the image obtained after removing the perspective distortion of a marker:

![Perspective removing](images/removeperspective.png)

Then, the image is divided in a grid with the same cells than the number of bits in the marker.
On each cell, the number of black and white pixels are counted to decide the bit assigned to the cell (from the majority value):

![Marker cells](images/bitsextraction1.png)

There are several parameters that can customize this process:

- ```int markerBorderBits```

This parameter indicates the width of the marker border. It is relative to the size of each bit. So, a
value of 2 indicates the border has the width of two internal bits.

This parameter needs to coincide with the border size of the markers you are using. The border size
can be configured in the marker drawing functions such as ```drawMarker()```.

Default value: 1

- ```double minOtsuStdDev```

This value determines the minimum standard deviation on the pixels values to perform Otsu
thresholding. If the deviation is low, it probably means that all the square is black (or white)
and applying Otsu does not make sense. If this is the case, all the bits are set to 0 (or 1)
depending if the mean value is higher or lower than 128.

Default value: 5.0

 - ```int perspectiveRemovePixelPerCell```

This parameter determines the number of pixels (per cell) in the obtained image after removing perspective
distortion (including the border). This is the size of the red squares in the image above.

For instance, lets assume we are dealing with markers of 5x5 bits and border size of 1 bit
(see ```markerBorderBits```). Then, the total number of cells/bits per dimension is 5 + 2*1 = 7 (the border
has to be counted twice). The total number of cells is 7x7.

If the value of ```perspectiveRemovePixelPerCell``` is 10, then the size of the obtained image will be
10*7 = 70 -> 70x70 pixels.

A higher value of this parameter can improve the bits extraction process (up to some degree), however it can penalize
the performance.

Default value: 4

- ```double perspectiveRemoveIgnoredMarginPerCell```

When extracting the bits of each cell, the numbers of black and white pixels are counted. In general, it is
not recommended to consider all the cell pixels. Instead it is better to ignore some pixels in the
margins of the cells.

The reason of this is that, after removing the perspective distortion, the cells' colors are, in general, not
perfectly separated and white cells can invade some pixels of black cells (and vice-versa). Thus, it is
better to ignore some pixels just to avoid counting erroneous pixels.

For instance, in the following image:

![Marker cell margins](images/bitsextraction2.png)

only the pixels inside the green squares are considered. It can be seen in the right image that
the resulting pixels contain a lower amount of noise from neighbor cells.
The ```perspectiveRemoveIgnoredMarginPerCell``` parameter indicates the difference between the red and
the green squares.

This parameter is relative to the total size of the cell. For instance if the cell size is 40 pixels and the
value of this parameter is 0.1, a margin of 40*0.1=4 pixels is ignored in the cells. This means that the total
amount of pixels that would be analyzed on each cell would actually be 32x32, instead of 40x40.

Default value: 0.13


#### Marker identification

After the bits have been extracted, the next step is checking if the extracted code belongs to the marker
dictionary and, if necessary, error correction can be performed.

- ```double maxErroneousBitsInBorderRate```

The bits of the marker border should be black. This parameter specifies the allowed number of erroneous
bits in the border, i.e. the maximum number of white bits in the border. It is represented
relative to the total number of bits in the marker.

Default value: 0.35


- ```double errorCorrectionRate```

Each marker dictionary has a theoretical maximum number of bits that can be corrected (```Dictionary.maxCorrectionBits```).
However, this value can be modified by the ```errorCorrectionRate``` parameter.

For instance, if the allowed number of bits that can be corrected (for the used dictionary) is 6 and the value of ```errorCorrectionRate``` is
0.5, the real maximum number of bits that can be corrected is 6*0.5=3 bits.

This value is useful to reduce the error correction capabilities in order to avoid false positives.

Default value: 0.6


#### Corner Refinement

After markers have been detected and identified, the last step is performing subpixel refinement
in the corner positions (see OpenCV ```cornerSubPix()``` and ```cv::aruco::CornerRefineMethod```)

Note that this step is optional and it only makes sense if the position of the marker corners have to
be accurate, for instance for pose estimation. It is usually a time consuming step and it is disabled by default.

- ```int cornerRefinementMethod```

This parameter determines if the corner subpixel process is performed or not. It can be disabled
if accurate corners are not necessary.

Default value: ```CORNER_REFINE_NONE```.

 - ```int cornerRefinementWinSize```

This parameter determines the window size of the subpixel refinement process.

High values can produce the effect that close image corners are included in the window region, so that the
marker corner moves to a different and wrong location during the process. Furthermore
it can affect to performance.

Default value: 5


- ```int cornerRefinementMaxIterations```, ```double cornerRefinementMinAccuracy```

These two parameters determine the stop criterion of the subpixel refinement process. The
```cornerRefinementMaxIterations``` indicates the maximum number of iterations and
```cornerRefinementMinAccuracy``` the minimum error value before stopping the process.

If the number of iterations is too high, it can affect the performance. On the other hand, if it is
too low, it can produce a poor subpixel refinement.

Default values:

```cornerRefinementMaxIterations```: 30, ```cornerRefinementMinAccuracy```: 0.1