Update zlib to release v1.2.7

3rdparty/zlib/CMakeLists.txt

@@ -82,7 +82,7 @@ if(UNIX)
   endif()
 endif()
 
-ocv_warnings_disable(CMAKE_C_FLAGS /wd4013 -Wattributes -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations)
+ocv_warnings_disable(CMAKE_C_FLAGS -Wattributes -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations)
 
 set_target_properties(${ZLIB_LIBRARY} PROPERTIES
         OUTPUT_NAME ${ZLIB_LIBRARY}

3rdparty/zlib/README

 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.6 is a general purpose data compression library.  All the code is
+zlib 1.2.7 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.6 are documented in the file ChangeLog.
+The changes made in version 1.2.7 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 

3rdparty/zlib/crc32.c

 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010, 2011 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -32,39 +32,17 @@
 
 #define local static
 
-/* Find a four-byte integer type for crc32_little() and crc32_big(). */
-#ifndef NOBYFOUR
-#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
-#    include <limits.h>
-#    define BYFOUR
-#    if (UINT_MAX == 0xffffffffUL)
-       typedef unsigned int u4;
-#    else
-#      if (ULONG_MAX == 0xffffffffUL)
-         typedef unsigned long u4;
-#      else
-#        if (USHRT_MAX == 0xffffffffUL)
-           typedef unsigned short u4;
-#        else
-#          undef BYFOUR     /* can't find a four-byte integer type! */
-#        endif
-#      endif
-#    endif
-#  endif /* STDC */
-#endif /* !NOBYFOUR */
-
 /* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
 #ifdef BYFOUR
-   typedef u4 crc_table_t;
-#  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
-                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
    local unsigned long crc32_little OF((unsigned long,
                         const unsigned char FAR *, unsigned));
    local unsigned long crc32_big OF((unsigned long,
                         const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
-   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */
 
@@ -78,10 +56,10 @@ local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
 #ifdef DYNAMIC_CRC_TABLE
 
 local volatile int crc_table_empty = 1;
-local crc_table_t FAR crc_table[TBLS][256];
+local z_crc_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const crc_table_t FAR *));
+   local void write_table OF((FILE *, const z_crc_t FAR *));
 #endif /* MAKECRCH */
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -111,9 +89,9 @@ local void make_crc_table OF((void));
 */
 local void make_crc_table()
 {
-    crc_table_t c;
+    z_crc_t c;
     int n, k;
-    crc_table_t poly;                   /* polynomial exclusive-or pattern */
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
     static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -127,11 +105,11 @@ local void make_crc_table()
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
         poly = 0;
         for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
-            poly |= (crc_table_t)1 << (31 - p[n]);
+            poly |= (z_crc_t)1 << (31 - p[n]);
 
         /* generate a crc for every 8-bit value */
         for (n = 0; n < 256; n++) {
-            c = (crc_table_t)n;
+            c = (z_crc_t)n;
             for (k = 0; k < 8; k++)
                 c = c & 1 ? poly ^ (c >> 1) : c >> 1;
             crc_table[0][n] = c;
@@ -142,11 +120,11 @@ local void make_crc_table()
            and then the byte reversal of those as well as the first table */
         for (n = 0; n < 256; n++) {
             c = crc_table[0][n];
-            crc_table[4][n] = REV(c);
+            crc_table[4][n] = ZSWAP32(c);
             for (k = 1; k < 4; k++) {
                 c = crc_table[0][c & 0xff] ^ (c >> 8);
                 crc_table[k][n] = c;
-                crc_table[k + 4][n] = REV(c);
+                crc_table[k + 4][n] = ZSWAP32(c);
             }
         }
 #endif /* BYFOUR */
@@ -168,7 +146,7 @@ local void make_crc_table()
         if (out == NULL) return;
         fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
         fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const crc_table_t FAR ");
+        fprintf(out, "local const z_crc_t FAR ");
         fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
         write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -188,7 +166,7 @@ local void make_crc_table()
 #ifdef MAKECRCH
 local void write_table(out, table)
     FILE *out;
-    const crc_table_t FAR *table;
+    const z_crc_t FAR *table;
 {
     int n;
 
@@ -209,13 +187,13 @@ local void write_table(out, table)
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-const unsigned long FAR * ZEXPORT get_crc_table()
+const z_crc_t FAR * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
         make_crc_table();
 #endif /* DYNAMIC_CRC_TABLE */
-    return (const unsigned long FAR *)crc_table;
+    return (const z_crc_t FAR *)crc_table;
 }
 
 /* ========================================================================= */
@@ -237,7 +215,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
 
 #ifdef BYFOUR
     if (sizeof(void *) == sizeof(ptrdiff_t)) {
-        u4 endian;
+        z_crc_t endian;
 
         endian = 1;
         if (*((unsigned char *)(&endian)))
@@ -271,17 +249,17 @@ local unsigned long crc32_little(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
-    register const u4 FAR *buf4;
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
 
-    c = (u4)crc;
+    c = (z_crc_t)crc;
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     while (len >= 32) {
         DOLIT32;
         len -= 32;
@@ -311,17 +289,17 @@ local unsigned long crc32_big(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
-    register const u4 FAR *buf4;
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
 
-    c = REV((u4)crc);
+    c = ZSWAP32((z_crc_t)crc);
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     buf4--;
     while (len >= 32) {
         DOBIG32;
@@ -338,7 +316,7 @@ local unsigned long crc32_big(crc, buf, len)
         c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
     } while (--len);
     c = ~c;
-    return (unsigned long)(REV(c));
+    return (unsigned long)(ZSWAP32(c));
 }
 
 #endif /* BYFOUR */

3rdparty/zlib/crc32.h

@@ -2,7 +2,7 @@
  * Generated automatically by crc32.c
  */
 
-local const crc_table_t FAR crc_table[TBLS][256] =
+local const z_crc_t FAR crc_table[TBLS][256] =
 {
   {
     0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

3rdparty/zlib/deflate.c

@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.6 Copyright 1995-2012 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.7 Copyright 1995-2012 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot

3rdparty/zlib/gzguts.h

@@ -12,7 +12,7 @@
 #  endif
 #endif
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -27,7 +27,11 @@
 #endif
 #include <fcntl.h>
 
-#ifdef __TURBOC__
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
 #  include <io.h>
 #endif
 
@@ -66,7 +70,6 @@
 /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
 #    if !defined(vsnprintf) && !defined(NO_vsnprintf)
 #      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#         include <io.h>
 #         define vsnprintf _vsnprintf
 #      endif
 #    endif
@@ -101,7 +104,7 @@
 #  include <windows.h>
 #  define zstrerror() gz_strwinerror((DWORD)GetLastError())
 #else
-#  ifdef STDC
+#  ifndef NO_STRERROR
 #    include <errno.h>
 #    define zstrerror() strerror(errno)
 #  else

3rdparty/zlib/gzlib.c

 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -17,7 +17,7 @@
 
 /* Local functions */
 local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
+local gzFile gz_open OF((const void *, int, const char *));
 
 #if defined UNDER_CE
 
@@ -89,11 +89,19 @@ local void gz_reset(state)
 
 /* Open a gzip file either by name or file descriptor. */
 local gzFile gz_open(path, fd, mode)
-    const char *path;
+    const void *path;
     int fd;
     const char *mode;
 {
     gz_statep state;
+    size_t len;
+    int oflag;
+#ifdef O_CLOEXEC
+    int cloexec = 0;
+#endif
+#ifdef O_EXCL
+    int exclusive = 0;
+#endif
 
     /* check input */
     if (path == NULL)
@@ -133,6 +141,16 @@ local gzFile gz_open(path, fd, mode)
                 return NULL;
             case 'b':       /* ignore -- will request binary anyway */
                 break;
+#ifdef O_CLOEXEC
+            case 'e':
+                cloexec = 1;
+                break;
+#endif
+#ifdef O_EXCL
+            case 'x':
+                exclusive = 1;
+                break;
+#endif
             case 'f':
                 state->strategy = Z_FILTERED;
                 break;
@@ -168,29 +186,57 @@ local gzFile gz_open(path, fd, mode)
     }
 
     /* save the path name for error messages */
-    state->path = malloc(strlen(path) + 1);
+#ifdef _WIN32
+    if (fd == -2) {
+        len = wcstombs(NULL, path, 0);
+        if (len == (size_t)-1)
+            len = 0;
+    }
+    else
+#endif
+        len = strlen(path);
+    state->path = malloc(len + 1);
     if (state->path == NULL) {
         free(state);
         return NULL;
     }
+#ifdef _WIN32
+    if (fd == -2)
+        if (len)
+            wcstombs(state->path, path, len + 1);
+        else
+            *(state->path) = 0;
+    else
+#endif
         strcpy(state->path, path);
 
-    /* open the file with the appropriate mode (or just use fd) */
-    state->fd = fd != -1 ? fd :
-        open(path,
+    /* compute the flags for open() */
+    oflag =
 #ifdef O_LARGEFILE
         O_LARGEFILE |
 #endif
 #ifdef O_BINARY
         O_BINARY |
+#endif
+#ifdef O_CLOEXEC
+        (cloexec ? O_CLOEXEC : 0) |
 #endif
         (state->mode == GZ_READ ?
          O_RDONLY :
-                (O_WRONLY | O_CREAT | (
-                    state->mode == GZ_WRITE ?
+         (O_WRONLY | O_CREAT |
+#ifdef O_EXCL
+          (exclusive ? O_EXCL : 0) |
+#endif
+          (state->mode == GZ_WRITE ?
            O_TRUNC :
-                        O_APPEND))),
-            0666);
+           O_APPEND)));
+
+    /* open the file with the appropriate flags (or just use fd) */
+    state->fd = fd > -1 ? fd : (
+#ifdef _WIN32
+        fd == -2 ? _wopen(path, oflag, 0666) :
+#endif
+        open(path, oflag, 0666));
     if (state->fd == -1) {
         free(state->path);
         free(state);
@@ -244,6 +290,16 @@ gzFile ZEXPORT gzdopen(fd, mode)
     return gz;
 }
 
+/* -- see zlib.h -- */
+#ifdef _WIN32
+gzFile ZEXPORT gzopen_w(path, mode)
+    const wchar_t *path;
+    const char *mode;
+{
+    return gz_open(path, -2, mode);
+}
+#endif
+
 /* -- see zlib.h -- */
 int ZEXPORT gzbuffer(file, size)
     gzFile file;

3rdparty/zlib/gzread.c

 /* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -57,8 +57,13 @@ local int gz_avail(state)
     if (state->err != Z_OK && state->err != Z_BUF_ERROR)
         return -1;
     if (state->eof == 0) {
-        if (strm->avail_in)
-            memmove(state->in, strm->next_in, strm->avail_in);
+        if (strm->avail_in) {       /* copy what's there to the start */
+            unsigned char *p = state->in, *q = strm->next_in;
+            unsigned n = strm->avail_in;
+            do {
+                *p++ = *q++;
+            } while (--n);
+        }
         if (gz_load(state, state->in + strm->avail_in,
                     state->size - strm->avail_in, &got) == -1)
             return -1;
@@ -340,7 +345,7 @@ int ZEXPORT gzread(file, buf, len)
             /* get more output, looking for header if required */
             if (gz_fetch(state) == -1)
                 return -1;
-            continue;       /* no progress yet -- go back to memcpy() above */
+            continue;       /* no progress yet -- go back to copy above */
             /* the copy above assures that we will leave with space in the
                output buffer, allowing at least one gzungetc() to succeed */
         }
@@ -373,7 +378,8 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzgetc_(file)
+#undef gzgetc
+int ZEXPORT gzgetc(file)
     gzFile file;
 {
     int ret;
@@ -402,11 +408,10 @@ int ZEXPORT gzgetc_(file)
     return ret < 1 ? -1 : buf[0];
 }
 
-#undef gzgetc
-int ZEXPORT gzgetc(file)
+int ZEXPORT gzgetc_(file)
 gzFile file;
 {
-    return gzgetc_(file);
+    return gzgetc(file);
 }
 
 /* -- see zlib.h -- */

3rdparty/zlib/gzwrite.c

@@ -338,19 +338,19 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
     va_start(va, format);
 #ifdef NO_vsnprintf
 #  ifdef HAS_vsprintf_void
-    (void)vsprintf(state->in, format, va);
+    (void)vsprintf((char *)(state->in), format, va);
     va_end(va);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = vsprintf(state->in, format, va);
+    len = vsprintf((char *)(state->in), format, va);
     va_end(va);
 #  endif
 #else
 #  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(state->in, size, format, va);
+    (void)vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
     len = vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
@@ -416,22 +416,23 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     state->in[size - 1] = 0;
 #ifdef NO_snprintf
 #  ifdef HAS_sprintf_void
-    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
                   a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
 #  endif
 #else
 #  ifdef HAS_snprintf_void
-    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
              a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
-    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
+                   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
+                   a19, a20);
 #  endif
 #endif
 
@@ -546,6 +547,7 @@ int ZEXPORT gzclose_w(file)
     }
 
     /* flush, free memory, and close file */
+    if (state->size) {
         if (gz_comp(state, Z_FINISH) == -1)
             ret = state->err;
         if (!state->direct) {
@@ -553,6 +555,7 @@ int ZEXPORT gzclose_w(file)
             free(state->out);
         }
         free(state->in);
+    }
     gz_error(state, Z_OK, NULL);
     free(state->path);
     if (close(state->fd) == -1)
@@ -560,34 +563,3 @@ int ZEXPORT gzclose_w(file)
     free(state);
     return ret;
 }
-
-/* used by zlibVersion() to get the vsnprintf story from the horse's mouth */
-unsigned long ZEXPORT gzflags()
-{
-    unsigned long flags = 0;
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifdef NO_vsnprintf
-    flags += 1L << 25;
-#    ifdef HAS_vsprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_vsnprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#else
-    flags += 1L << 24;
-#  ifdef NO_snprintf
-    flags += 1L << 25;
-#    ifdef HAS_sprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_snprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#endif
-    return flags;
-}

3rdparty/zlib/inflate.c

 /* inflate.c -- zlib decompression
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -519,11 +519,6 @@ unsigned out;
         bits -= bits & 7; \
     } while (0)
 
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
-    ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
-     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
 /*
    inflate() uses a state machine to process as much input data and generate as
    much output data as possible before returning.  The state machine is
@@ -817,7 +812,7 @@ int flush;
 #endif
         case DICTID:
             NEEDBITS(32);
-            strm->adler = state->check = REVERSE(hold);
+            strm->adler = state->check = ZSWAP32(hold);
             INITBITS();
             state->mode = DICT;
         case DICT:
@@ -1189,7 +1184,7 @@ int flush;
 #ifdef GUNZIP
                      state->flags ? hold :
 #endif
-                     REVERSE(hold)) != state->check) {
+                     ZSWAP32(hold)) != state->check) {
                     strm->msg = (char *)"incorrect data check";
                     state->mode = BAD;
                     break;
@@ -1275,7 +1270,7 @@ const Bytef *dictionary;
 uInt dictLength;
 {
     struct inflate_state FAR *state;
-    unsigned long id;
+    unsigned long dictid;
     unsigned char *next;
     unsigned avail;
     int ret;
@@ -1286,11 +1281,11 @@ uInt dictLength;
     if (state->wrap != 0 && state->mode != DICT)
         return Z_STREAM_ERROR;
 
-    /* check for correct dictionary id */
+    /* check for correct dictionary identifier */
     if (state->mode == DICT) {
-        id = adler32(0L, Z_NULL, 0);
-        id = adler32(id, dictionary, dictLength);
-        if (id != state->check)
+        dictid = adler32(0L, Z_NULL, 0);
+        dictid = adler32(dictid, dictionary, dictLength);
+        if (dictid != state->check)
             return Z_DATA_ERROR;
     }
 

3rdparty/zlib/inftrees.c

@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.6 Copyright 1995-2012 Mark Adler ";
+   " inflate 1.2.7 Copyright 1995-2012 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 203, 69};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 78, 68};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

3rdparty/zlib/zconf.h.cmakein

 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -67,7 +67,6 @@
 #    define gzdopen               z_gzdopen
 #    define gzeof                 z_gzeof
 #    define gzerror               z_gzerror
-#    define gzflags               z_gzflags
 #    define gzflush               z_gzflush
 #    define gzgetc                z_gzgetc
 #    define gzgetc_               z_gzgetc_
@@ -76,6 +75,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -129,9 +131,9 @@
 #  define free_func             z_free_func
 #  ifndef Z_SOLO
 #    define gzFile                z_gzFile
+#  endif
 #  define gz_header             z_gz_header
 #  define gz_headerp            z_gz_headerp
-#  endif
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -144,9 +146,7 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  ifndef Z_SOLO
 #  define gz_header_s           z_gz_header_s
-#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -390,6 +390,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -404,36 +427,47 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if defined _LARGEFILE64_SOURCE && -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#ifndef _LFS64_LARGEFILE
-#  define _LFS64_LARGEFILE 0
-#endif
-
-#ifndef _FILE_OFFSET_BITS
-#  define _FILE_OFFSET_BITS 0
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define Z_LARGE
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
 #endif
-
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
 #    ifdef VMS
 #      include <unixio.h>       /* for off_t */
 #    endif
 #    ifndef z_off_t
 #      define z_off_t off_t
 #    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#else
+#  define _LFS64_LARGEFILE 0
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -446,14 +480,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

3rdparty/zlib/zlib.h

 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.6, January 29th, 2012
+  version 1.2.7, May 2nd, 2012
 
   Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.6"
-#define ZLIB_VERNUM 0x1260
+#define ZLIB_VERSION "1.2.7"
+#define ZLIB_VERNUM 0x1270
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 6
+#define ZLIB_VER_REVISION 7
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -452,14 +452,17 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   error.  However if all decompression is to be performed in a single step (a
   single call of inflate), the parameter flush should be set to Z_FINISH.  In
   this case all pending input is processed and all pending output is flushed;
-  avail_out must be large enough to hold all the uncompressed data.  (The size
-  of the uncompressed data may have been saved by the compressor for this
-  purpose.) The next operation on this stream must be inflateEnd to deallocate
-  the decompression state.  The use of Z_FINISH is not required to perform an
-  inflation in one step.  However it may be used to inform inflate that a
-  faster approach can be used for the single inflate() call.  Z_FINISH also
-  informs inflate to not maintain a sliding window if the stream completes,
-  which reduces inflate's memory footprint.
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.) The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
 
      In this implementation, inflate() always flushes as much output as
   possible to the output buffer, and always uses the faster approach on the
@@ -1217,7 +1220,10 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
 
      "a" can be used instead of "w" to request that the gzip stream that will
    be written be appended to the file.  "+" will result in an error, since
-   reading and writing to the same gzip file is not supported.
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
 
      These functions, as well as gzip, will read and decode a sequence of gzip
    streams in a file.  The append function of gzopen() can be used to create
@@ -1578,9 +1584,8 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running CRC-32 with the bytes buf[0..len-1] and return the
    updated CRC-32.  If buf is Z_NULL, this function returns the required
-   initial value for the for the crc.  Pre- and post-conditioning (one's
-   complement) is performed within this function so it shouldn't be done by the
-   application.
+   initial value for the crc.  Pre- and post-conditioning (one's complement) is
+   performed within this function so it shouldn't be done by the application.
 
    Usage example:
 
@@ -1650,9 +1655,15 @@ struct gzFile_s {
     unsigned char *next;
     z_off64_t pos;
 };
-ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
-#define gzgetc(g) \
-    ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc_(g))
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
 
 /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
  * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
@@ -1660,7 +1671,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
  * functions are changed to 64 bits) -- in case these are set on systems
  * without large file support, _LFS64_LARGEFILE must also be true
  */
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#ifdef Z_LARGE64
    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
@@ -1669,7 +1680,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
 #endif
 
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
 #  ifdef Z_PREFIX_SET
 #    define z_gzopen z_gzopen64
 #    define z_gzseek z_gzseek64
@@ -1685,7 +1696,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
 #    define adler32_combine adler32_combine64
 #    define crc32_combine crc32_combine64
 #  endif
-#  ifndef _LARGEFILE64_SOURCE
+#  ifndef Z_LARGE64
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
      ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
      ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
@@ -1717,12 +1728,13 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
 /* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
-#ifndef Z_SOLO
-  ZEXTERN unsigned long  ZEXPORT gzflags          OF((void));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
 #endif
 
 #ifdef __cplusplus

3rdparty/zlib/zutil.c

 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
 #include "zutil.h"
+#ifndef Z_SOLO
+#  include "gzguts.h"
+#endif
 
 #ifndef NO_DUMMY_DECL
 struct internal_state      {int dummy;}; /* for buggy compilers */
@@ -85,11 +88,31 @@ uLong ZEXPORT zlibCompileFlags()
 #ifdef FASTEST
     flags += 1L << 21;
 #endif
-#ifdef Z_SOLO
-    return flags;
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
 #else
-    return flags + gzflags();
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
 #endif
+    return flags;
 }
 
 #ifdef DEBUG

3rdparty/zlib/zutil.h

 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -13,7 +13,7 @@
 #ifndef ZUTIL_H
 #define ZUTIL_H
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -245,4 +245,8 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
 #define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
 
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
 #endif /* ZUTIL_H */