Problem: client/server pattern is not documented

Solution: add man pages/sections for:

 * ZMQ_SERVER
 * ZMQ_CLIENT
 * ZMQ_THREADSAFE
 * zmq_msg_routing_id
 * zmq_msg_set_routing_id

doc/Makefile.am

@@ -6,6 +6,7 @@ MAN3 = zmq_bind.3 zmq_unbind.3 zmq_connect.3 zmq_disconnect.3 zmq_close.3 \
     zmq_msg_init.3 zmq_msg_init_data.3 zmq_msg_init_size.3 \
     zmq_msg_move.3 zmq_msg_copy.3 zmq_msg_size.3 zmq_msg_data.3 zmq_msg_close.3 \
     zmq_msg_send.3 zmq_msg_recv.3 \
+    zmq_msg_routing_id.3 zmq_msg_set_routing_id.3 \
     zmq_send.3 zmq_recv.3 zmq_send_const.3 \
     zmq_msg_get.3 zmq_msg_set.3 zmq_msg_more.3 zmq_msg_gets.3 \
     zmq_getsockopt.3 zmq_setsockopt.3 \

doc/zmq_getsockopt.txt

@@ -688,6 +688,17 @@ Default value:: 0 (leave to OS default)
 Applicable socket types:: all, when using TCP transports.
 
 
+ZMQ_THREADSAFE: Retrieve socket thread safety
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The 'ZMQ_THREADSAFE' option shall retrieve a boolean value indicating whether
+or not the socket is threadsafe. Currently only 'ZMQ_CLIENT' sockets are
+threadsafe.
+
+[horizontal]
+Option value type:: boolean
+Applicable socket types:: all
+
+
 ZMQ_TOS: Retrieve the Type-of-Service socket override status
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Retrieve the IP_TOS option for the socket.

doc/zmq_msg_routing_id.txt

+zmq_msg_routing_id(3)
+=====================
+
+
+NAME
+----
+zmq_msg_routing_id - return routing ID for message, if any
+
+
+SYNOPSIS
+--------
+*uint32_t zmq_msg_routing_id (zmq_msg_t '*message');*
+
+
+DESCRIPTION
+-----------
+The _zmq_msg_routing_id()_ function returns the routing ID for the message,
+if any. The routing ID is set on all messages received from a 'ZMQ_SERVER'
+socket. To send a message to a 'ZMQ_SERVER' socket you must set the routing
+ID of a connected 'ZMQ_CLIENT' peer. Routing IDs are transient.
+
+
+RETURN VALUE
+------------
+The _zmq_msg_routing_id()_ function shall return zero if there is no routing
+ID, otherwise it shall return an unsigned 32-bit integer greater than zero.
+
+
+EXAMPLE
+-------
+.Receiving a client message and routing ID
+----
+void *ctx = zmq_ctx_new ();
+assert (ctx);
+
+void *server = zmq_socket (ctx, ZMQ_SERVER);
+assert (server);
+int rc = zmq_bind (server, "tcp://127.0.0.1:8080");
+assert (rc == 0);
+
+zmq_msg_t message;
+rc = zmq_msg_init (&message);
+assert (rc == 0);
+
+//  Receive a message from socket
+rc = zmq_msg_recv (server, &message, 0);
+assert (rc != -1);
+uint32_t routing_id = zmq_msg_routing_id (&message);
+assert (routing_id);
+----
+
+
+SEE ALSO
+--------
+linkzmq:zmq_msg_set_routing_id[3]
+
+
+AUTHORS
+-------
+This page was written by the 0MQ community. To make a change please
+read the 0MQ Contribution Policy at <http://www.zeromq.org/docs:contributing>.

doc/zmq_msg_set_routing_id.txt

+zmq_msg_set_routing_id(3)
+=========================
+
+
+NAME
+----
+
+zmq_msg_set_routing_id - set routing ID property on message
+
+
+SYNOPSIS
+--------
+*int zmq_msg_set_routing_id (zmq_msg_t '*message', uint32_t 'routing_id');*
+
+
+DESCRIPTION
+-----------
+The _zmq_msg_set_routing_id()_ function sets the 'routing_id' specified, on the
+the message pointed to by the 'message' argument. The 'routing_id' must be
+greater than zero. To get a valid routing ID, you must receive a message
+from a 'ZMQ_SERVER' socket, and use the libzmq:zmq_msg_routing_id method.
+Routing IDs are transient.
+
+
+RETURN VALUE
+------------
+The _zmq_msg_set_routing_id()_ function shall return zero if successful. Otherwise it
+shall return `-1` and set 'errno' to one of the values defined below.
+
+
+ERRORS
+------
+*EINVAL*::
+The provided 'routing_id' is zero.
+
+
+SEE ALSO
+--------
+linkzmq:zmq_msg_routing_id[3]
+linkzmq:zmq[7]
+
+
+AUTHORS
+-------
+This page was written by the 0MQ community. To make a change please
+read the 0MQ Contribution Policy at <http://www.zeromq.org/docs:contributing>.

doc/zmq_socket.txt

@@ -56,6 +56,78 @@ The following sections present the socket types defined by 0MQ, grouped by the
 general _messaging pattern_ which is built from related socket types.
 
 
+Client-server pattern
+~~~~~~~~~~~~~~~~~~~~~
+
+The client-server pattern is used to allow a single 'ZMQ_SERVER' _server_ talk
+to one or more 'ZMQ_CLIENT' _clients_. The client always starts the conversation,
+after which either peer can send messages asynchronously, to the other.
+
+The client-server pattern is formally defined by http://rfc.zeromq.org/spec:41.
+
+Note: this pattern deprecates the use of 'ZMQ_DEALER' and 'ZMQ_ROUTER' to build
+client-server architectures.
+
+ZMQ_CLIENT
+^^^^^^^^^^
+A 'ZMQ_CLIENT' socket talks to a 'ZMQ_SERVER' socket. Either peer can connect,
+though the usual and recommended model is to bind the 'ZMQ_SERVER' and connect
+the 'ZMQ_CLIENT'.
+
+If the 'ZMQ_CLIENT' socket has established a connection, linkzmq:zmq_send[3]
+will accept messages, queue them, and send them as rapidly as the network
+allows. The outgoing buffer limit is defined by the high water mark for the
+socket. If the outgoing buffer is full, or if there is no connected peer,
+linkzmq:zmq_send[3] will block, by default. The 'ZMQ_CLIENT' socket will not
+drop messages.
+
+When a 'ZMQ_CLIENT' socket is connected to multiple 'ZMQ_SERVER' sockets,
+outgoing messages are distributed between connected peers on a round-robin
+basis. Likewise, the 'ZMQ_CLIENT' socket receives messages fairly from each
+connected  peer. This usage is sensible only for stateless protocols.
+
+'ZMQ_CLIENT' sockets are threadsafe and can be used from multiple threads
+at the same time. Note that replies from a 'ZMQ_SERVER' socket will go to
+the first client thread that calls libzmq:zmq_msg_recv. If you need to get
+replies back to the originating thread, use one 'ZMQ_CLIENT' socket per
+thread.
+
+[horizontal]
+.Summary of ZMQ_CLIENT characteristics
+Compatible peer sockets:: 'ZMQ_SERVER'
+Direction:: Bidirectional
+Send/receive pattern:: Unrestricted
+Outgoing routing strategy:: Round-robin
+Incoming routing strategy:: Fair-queued
+Action in mute state:: Block
+
+
+ZMQ_SERVER
+^^^^^^^^^^
+A 'ZMQ_SERVER' socket talks to a set of 'ZMQ_CLIENT' sockets. A 'ZMQ_SERVER'
+socket can only reply to an incoming message: the 'ZMQ_CLIENT' peer must
+always initiate a conversation.
+
+Each received message has a 'routing_id' that is a 32-bit unsigned integer.
+The application can fetch this with linkzmq:zmq_msg_routing_id[3]. To send
+a message to a given 'ZMQ_CLIENT' peer the application must set the peer's
+'routing_id' on the message, using linkzmq:zmq_msg_set_routing_id[3].
+
+If the 'routing_id' is not specified, or does not refer to a connected client
+peer, the send call will fail with EHOSTUNREACH. If the outgoing buffer for
+the client peer is full, the send call will fail with EAGAIN. The 'ZMQ_SERVER'
+socket shall not drop messages, nor shall it block.
+
+[horizontal]
+.Summary of ZMQ_SERVER characteristics
+Compatible peer sockets:: 'ZMQ_CLIENT'
+Direction:: Bidirectional
+Send/receive pattern:: Unrestricted
+Outgoing routing strategy:: See text
+Incoming routing strategy:: Fair-queued
+Action in mute state:: Return EAGAIN
+
+
 Request-reply pattern
 ~~~~~~~~~~~~~~~~~~~~~
 The request-reply pattern is used for sending requests from a ZMQ_REQ _client_